DTS DTS Alchemy 3 Wash

ALCHEMY 3 is a very compact high performance Fresnel LED wash moving head made for medium to small theatres and television studios. The unit is able to deliver an outstanding light quality coupled with a high luminosity.
ALCHEMY 3 bears the ‘HQS’ (High quality Spectrum) mark which identifies the ability to generate a superior white light and a broad color gamut with pastel shades and rich warm nuances. Also ALCHEMY 3’ ‘Silent’ mode matches theatre and television standards, where quietness is a key factor.

Output
• Multi-chip LED source

• 6,600 Lumen output

• CRI: up to 98

• TLCI: up to 96

• LED lifespan: 20,000 hours (70% lumen output)

Optical group
• 14.1°- 45.2° linear zoom

• Ø 175 mm Fresnel lens

• Beam shaper (2x1 ratio) with endless rotation; indexable

• Heavy frost filter insertable via DMX

• Retractable ‘top hat’

White and Color generation
• Linear CCT (1800 K - 10000 K)

• Green saturation: Linearly adjustable green/magenta point

• 100 gel filters emulation- Linear crossfade from gel filters emulation to CCT whites
- Linear crossfade between emulated gel filters
- True color of gel filters emulation at any CCT values

• “Raw” RGBACL color-mixing in ‘Advanced’ mode

• Extra deep colors: Two DMX-selectable filters (‘deeper blue’ and ‘deep red’) allow to further extend the range of reproducible colors toward the two ends of the visible spectrum

• HQS (High Quality Spectrum) - DTS’ trademark certifies a product’ superior white light quality and its ability to generate an extended color palette offering a wider gamut of pastel shades with rich warm nuances.

Dimmer
• ‘Hi-Q Dimming’ technology – guarantees a perfect linearity in the increase / attenuation of brightness of multi-chip LED sources, even at low dimming levels, without visible ‘steps’ between adjacent values

• Tungsten emulation - CCT variation emulates behavior of Halo-lamps

Control
• LCD graphic display + 4 soft-keys; Auto-flip; Key-Lock function

• RDM / DMX 512 protocol

• Wireless DMX available on request

• Art-Net 4, sACN protocols available on request

• ‘Standard’ and ‘Silent’ operation modes

• Internal operating system updatable via DTS dongle firmware uploader

• “Li-Fe” backup battery allows the use of the unit’s on-board display when it is not powered, besides ensuring a safe return and blockage of the top hat during shut down

DMX
• 5 DMX modes:
- 1. CCT (default)
- 2. Advanced
- 3. Basic
- 4. Expo
- 5. CMY Emulation

Pan & Tilt
• Pan 540° :1.8 s

• Tilt 215° : 1.1 s

• 16-bit resolution

Power supply
• Wide-range 100-240Vac 50-60 Hz
• Power consumption: 300 W max
• Power Factor: PF >0.94

Connections
• Power supply: PowerCON TRUE1 In/Out panel connectors

• DMX: XLR 3-pole and 5-pole In/Out panel connectors

Circuits protections
Overvoltage and overtemperature circuits protection

Operating temperature
-10° / 40° C

Physical
• IP20
• Weight: 15.5 Kg (34 lbs)
• Finishing: Black

Accessories included
• 1 x PowerCON TRUE1 female connector (code 0520P066)

• 1 x Omega bracket with “Fast Lock” (code 02K00467)