DTS Alchemy 5 Wash

ALCHEMY 5 is a high performance LED wash moving head that garantee high luminosity coupled with a superior quality of light, both in white lights in which an accurate color rendering is assured, and in colors. Alchemy 5 is one of the first projectors to be marked HQS (High quality Spectrum-DTS trademark) with which we emphasize the ability to generate high quality whites, a palette of colors more extensive than the range of pastel-like nuances.
In Addition ALCHEMY 5 has been designed to meet the theatre and television needs where quietness, versability and quality of the light are paramount.

Output
• Multi-chip LED source

• LED source: 400 W

• Lumen output: 10,800

• CRI: up to 98

• TLCI: up to 96

• LED lifespan: 20,000 hours (70% lumen output)

Optical group
• 10°- 47° linear zoom

• Ø 250 mm Fresnel lens

• Beam shaper (2x1 ratio) with endless rotation; indexable

• 2 DMX-selectable frost filters (Soft and Heavy)

• Retractable ‘top hat’

White and Color generation
• Linear CCT (1800 K - 10000 K)

• Green saturation: Linearly adjustable green/magenta point

• 100 gel filters emulation
- Linear crossfade from gel filters emulation to CCT whites
- Linear crossfade between emulated gel filters
- True color of gel filters emulation at any CCT values

• “Raw” RGBACL color-mixing in ‘Advanced’ mode

• Extra deep colors: Two DMX-selectable filters (‘deeper blue’ and ‘deep red’) allow to further extend the range of reproducible colors toward the two ends of the visible spectrum

• HQS (High Quality Spectrum) - DTS’ trademark certifies a product’ superior white light quality and its ability to generate an extended color palette offering a wider gamut of pastel shades with rich warm nuances.

Dimmer
• ‘Hi-Q Dimming’ technology – guarantees a perfect linearity in the increase / attenuation of brightness of multi-chip LED sources, even at low dimming levels, without visible ‘steps’ between adjacent values

• Tungsten emulation - CCT variation emulates behavior of Halo-lamps

Control
• LCD graphic display with 4 soft keys (“auto-flip” and “key-lock” functions available)

• Art-Net 4, sACN, RDM/DMX 512 protocols

• ‘Standard’ and ‘Silent’ operation modes
- Noise level at Silent mode: 37dBA @ 1m (normal operation, full power)

• Firmware updatable via DTS firmware uploader dongle

• “Li-Fe” backup battery allows the use of the unit’s on-board display when it is not powered, besides ensuring a safe return and blockage of the top hat during shut down

DMX
• 5 DMX modes:
- 1. CCT (default)
- 2. Advanced
- 3. Basic
- 4. Expo
- 5. CMY Emulation

Pan & Tilt
• Pan 540° : 3.8 s

• Tilt 220° : 2.1 s

• 16-bit resolution

• Pan / Tilt lock

Power supply
• Wide range 100-277Vac 50-60 Hz
• Power consumption: 450 W max
• Power Factor: PF >0.90

Connections
• Power supply: PowerCON TRUE1 In/Out panel connectors

• DMX: XLR 3-pole and 5-pole In/Out panel connectors

• Art-Net / sACN: etherCON RJ45 connector

Circuits protections
Overvoltage and overtemperature circuits protection

Operating temperature
-10° / 45° C

Physical
• IP20
• Weight: 26.5 Kg (58 lbs)
• Finishing: Black