Searched
Price: 495,00 € netto excl.21% tax
598,95 € brutto incl. 21% tax
Per Piece fixed price
Count Available 2
Created On: 11.07.2024 18:50
Condition:
Used
Twittern
598,95 € brutto incl. 21% tax
Per Piece fixed price
Count Available 2
Created On: 11.07.2024 18:50
Condition:
Used
Twittern
PRG ReNEW Tungsten LED Retrofit Assembly with PHX 36 degree Lens Tube
Order now: https://cuesale.com/product/prg-renew-tungsten-led-retrofit-assembly-with-phx-36-degree-lens-tube/
The 3,000K ReNEW Tungsten LED Retrofit Assembly with Stage Pin Power Cord from PRG is an LED light engine designed to work in conjunction with the lens tube and shutter assemblies of the ETC Source ellipsoidal.
Exchanging the tungsten light source of the Source Four with the tungsten LED source of the ReNEW Assembly reduces energy consumption and HVAC costs while producing lumen output that exceeds a 575W HPL lamp. The ReNEW light engine draws 190W at full output and just 3.1W during standby.
The assembly is designed around a chip-on-board (COB) LED light source array paired with a specially designed reflector and lens that provides optimal illuminance distribution through the Source Four lens. The COB array is designed for easy future upgrading as improved LEDs become available.
The Source Four reflector and lamp assembly can be replaced in less than a minute with the ReNEW Assembly which is compatible with both ETC standard and Enhanced Definition Lens Tubes (EDLT) and all Source Four accessories. The fixture can be operated with 1, 2, or 3 channels of DMX control, or operated in user-selectable stand-alone mode for simple installations or where DMX is not available. A DMX signal can be connected and passed through the unit via optically isolated male and female flush-mount 5-Pin XLR connections.
The ReNEW Assembly offers 90-240 VAC 50/60 Hz operation via its Neutrik powerCON connection while up to four 4 units may be linked using the thru connector. An additional power connection is available for a 9 VDC battery to operate the control panel for quick setup or for shop preparation without need to connect primary full power to the unit.
The unit comes with a 36° lens tube as pictured and a colour frame (not pictured). Also available without lens tube – call.
€495,00 Ex V.A.T. (MwST) per piece.
Prices are Excluding 21% VAT / MwSt.
Products are located in The Netherlands, customers with a V.A.T. ID number pay 0% V.A.T. / MwSt
Please send us your full address for a shipment quote / price.
For more used equipment check our other advertisements on this site or have a look at our website www.cuesale.com
Order now: https://cuesale.com/product/prg-renew-tungsten-led-retrofit-assembly-with-phx-36-degree-lens-tube/
The 3,000K ReNEW Tungsten LED Retrofit Assembly with Stage Pin Power Cord from PRG is an LED light engine designed to work in conjunction with the lens tube and shutter assemblies of the ETC Source ellipsoidal.
Exchanging the tungsten light source of the Source Four with the tungsten LED source of the ReNEW Assembly reduces energy consumption and HVAC costs while producing lumen output that exceeds a 575W HPL lamp. The ReNEW light engine draws 190W at full output and just 3.1W during standby.
The assembly is designed around a chip-on-board (COB) LED light source array paired with a specially designed reflector and lens that provides optimal illuminance distribution through the Source Four lens. The COB array is designed for easy future upgrading as improved LEDs become available.
The Source Four reflector and lamp assembly can be replaced in less than a minute with the ReNEW Assembly which is compatible with both ETC standard and Enhanced Definition Lens Tubes (EDLT) and all Source Four accessories. The fixture can be operated with 1, 2, or 3 channels of DMX control, or operated in user-selectable stand-alone mode for simple installations or where DMX is not available. A DMX signal can be connected and passed through the unit via optically isolated male and female flush-mount 5-Pin XLR connections.
The ReNEW Assembly offers 90-240 VAC 50/60 Hz operation via its Neutrik powerCON connection while up to four 4 units may be linked using the thru connector. An additional power connection is available for a 9 VDC battery to operate the control panel for quick setup or for shop preparation without need to connect primary full power to the unit.
The unit comes with a 36° lens tube as pictured and a colour frame (not pictured). Also available without lens tube – call.
€495,00 Ex V.A.T. (MwST) per piece.
Prices are Excluding 21% VAT / MwSt.
Products are located in The Netherlands, customers with a V.A.T. ID number pay 0% V.A.T. / MwSt
Please send us your full address for a shipment quote / price.
For more used equipment check our other advertisements on this site or have a look at our website www.cuesale.com
CUE Sale B.V. specialises in selling Used Light, Sound & Video equipment.
Our Office, Showroom & warehouse is based in Eijsden in the south of the Netherlands,
from where we sell to local clients and export to clients located on continents all over the world.
All the equipment listed on our website is checked and available from stock, ready to be used on its next show / production.
and can be shipped from our location within 48 hours after a first quote has been made.
If you have any questions or if your interested in any of our products don’t hesitate to contact us or visit our showroom.
Visit our website at www.cuesale.com
CUE Sale B.V.
Zoerbeemden 31
6245 LR Eijsden
The Netherlands
Tel: +31 (0)43 20 43 020
Mail: info@cuesale.com
Our Office, Showroom & warehouse is based in Eijsden in the south of the Netherlands,
from where we sell to local clients and export to clients located on continents all over the world.
All the equipment listed on our website is checked and available from stock, ready to be used on its next show / production.
and can be shipped from our location within 48 hours after a first quote has been made.
If you have any questions or if your interested in any of our products don’t hesitate to contact us or visit our showroom.
Visit our website at www.cuesale.com
CUE Sale B.V.
Zoerbeemden 31
6245 LR Eijsden
The Netherlands
Tel: +31 (0)43 20 43 020
Mail: info@cuesale.com
CUE Sale B.V.
Hugo van Dijk
Zoerbeemden 31
NL NL, 6245LR, Eijsden
Telefon: 0031432043020
E-Mail: Info@cuesale.com
Webseite: http://www.cuesale.com
View all ads by this user
Hugo van Dijk
Zoerbeemden 31
NL NL, 6245LR, Eijsden
Telefon: 0031432043020
E-Mail: Info@cuesale.com
Webseite: http://www.cuesale.com
View all ads by this user
Report Fraud
Tips for safe trading
Print Ad
By contacting via e-mail, your data will be transmitted by you to the provider of this article and stored and processed by the provider for this purpose.
Tips for safe trading
Print Ad
By contacting via e-mail, your data will be transmitted by you to the provider of this article and stored and processed by the provider for this purpose.
