Show category navigation
Price: 2 450,00 € brutto incl.19% tax
          2 058,82 € netto excl. 19% tax
Per Piece
Created On: 15.11.2023 12:24
Condition:
Used




This Remote Camera Panel from BRADLEY fits into a standard engineering desk with recessed connectors on the underside. It is available in 2 variants: with a standard joystick type control or with a continuous wheel control.
The controller can address up to 4 cameras, of different types (Sony, Ikegami, Panasonic, Hitachi, JVC, Bradley, etc.) with up to 99 cameras on a system. Camera type selection is via the menu and internal DIP switches set which 4 cameras are to be addressed. A small ‘Protocol Converter’ is required at the camera to communicate with each individual type.
Multiple RCPs can be cascaded onto the same data stream which is 9.6k baud, RS485 and can be readily sent via radio, TCP/IP networks or twisted pair cable making this a very flexible controller.
Main Controls
The main controls operate in the standard fashion with 'touch-down' on the joystick to switch the operator's monitor to the currently selected camera.
The sensitivity of the joystick can be adjusted and the whole panel can be 'locked' to prevent inadvertent adjustments.
Clear LED readouts display the major settings for each camera as it is selected; Iris, Gain, Shutter, Camera No. etc.
'Touch-down' knobs enable instant return to 'shutter OFF' and '0dB Gain'. Auto Iris is also selected with a touch down.
All the buttons and knobs on the panel are illuminated to a user adjustable level and each button illuminates brightly when selected.
The camera address range can be set to any 4 sequential cameras up to 99.
Tally light inputs via the built-n GPIO port, indicate above the selected camera and also each monitor switching output is indicated.
Assignable Menu
The Assignable Menu sets this RCP apart from others. There are 3 instantly accessible menus, each with 3 adjustable parameters.
Each of these 9 parameters can be changed by the operator and put into any menu making it fully customisable to the operator preference. Again, 'touch-down' knobs are used for switching functions.
4 Scene Files are avaiable for each camera. These manage Red, Green, Blue Gains and Pedestals.

Connection Sockets
The sockets on the underside of the panel are recessed and angled to use the minmum of space uner the panel.
Standard XLR connectors are used for both power input and for data output.
Additionally, there is a Dsub GPIO connector for triggering the tally lights and also for monitor switching outputs.
The 4 pin Hirose enables cascading of multiple RCPs onto a single data stream using a single power supply.
Network Connectivity
Using either a BRADLEY switcher or off-the-shelf RS485-to-IP converters enables communication over TCP/IP networks.
Currently Available Controls
Iris, Iris Range, Auto Iris, Master Pedestal, Gain, Shutter, Bars, Gamma, Aperture Correction (Detail) Scene Files A, B, C, D.
White Balance - Scene, PUSH, Auto Tracing, 5600K, 3200K
Auto Black Balance
Red, Green and Blue Gain
Red, Green and Blue Pedestal
Filter Wheel, Camera Menu Access
Sync phase adjustments
Tally output to cameras
Remote Relay Switching
Iris Control Sensitivity, Panel Lock
Camera type selection
Camera select (any 4 sequential cameras up to 99)
Backlight Intensity
Tally Inputs, Monitor select via GPIO
Other functions can be adjusted via the camera menu displays. Additional functions not supported on the standard panel can be included in the assignable function panel by arrangement with Bradley Engineering.
Remote Pan & Tilt Systems
When used with BRADLEY remote systems the RCP data is multiplexed onto the same data stream as pan, tilt and lens controls. This is extremely efficient and can reduce the number of links to just 1 single data path (or radio link) to the remote cameras for complete control of camera, pan and tilt, lens and any other required functions.
Using either a BRADLEY switcher or off-the-shelf RS485-to-IP converters enables communication over TCP/IP networks.
Camera Models Supported
Currently the RCP3 supports commands for the following camera models;
Sony
Panasoninc (2 protocols)
JVC (LANC & Professional)
Ikegami
Hitachi
Bradley (all models)
AltaSens AL-CM460
Grass Valley - TBA
When used with the JVC GY-HM850 shoulder-mount camcorder and JVC DT-X71CI monitor, the BRADLEY Remote Camera Panel Mk3 delivers a very cost-effective studio solution. Each camera can be fitted with an RD_12 wireless CCU controller, which can also be configured as a wired solution, and a DT-X monitor, with just the single RD_11 transceiver required along with the remote control panel. Since the JVC GY-HM850 cameras have SDI outputs, these can be connected to a vision mixer, including those made by Streamstar. For multi-camera productions, the GY-HM850 provides a genlock input and timecode input/output; the GY-HM850 can also be used as a master timecode generator, providing a timecode output for other cameras or audio recorders to synchronise to.
Official Bradley links and downloads:
Bradley Remote Home Page
Bradley Product Range Brochure
Bradley RCP3 Universal Remote Camera Panel Brochure
Bradley RCP3 Universal Remote Camera Panel Manual
Bradley RCP3 Universal Remote Camera Panel Home Page
TEHNICAL DATA
Dimensions: 100 x 353 x 90 inc plug protrusions
Weight: 1.7kg
Power: 8 - 15v DC, 2 watts.
Outputs:
Iris, Iris Range, Auto Iris
Master Pedestal
Gain
Shutter
Bars
Gamma
Aperture Correction (Detail)
Scene Files A, B, C, D.
White Balance - Scene, PUSH, Auto Tracing, 5600K, 3200K
Auto Black Balance
Red, Green and Blue Gain
Red, Green and Blue Pedestal
Filter Wheel, Camera Menu Access
Sync phase adjustments
Tally output to cameras
Remote Relay Switching
Iris Control Sensitivity
Panel Lock
Camera type selection
Camera select (any 4 sequential cameras up to 99)
Backlight Intensity
Tally Inputs via GPIO
Monitor select via GPIO
Connections:
Standard XLR connectors are used for both power input and for data output.
Additionally, there is a Dsub GPIO connector for triggering the tally lights and also for monitor switching outputs.
The 4 pin Hirose enables cascading of multiple RCPs onto a single data stream using a single power supply.
Data: RS485, 9600baud


Kunstgriff Veranstaltungstechnik GmbH
Peter Morawietz
Schloßplatz 5
DE DE, 04736, Waldheim
Telefon: 0152/31726415
E-Mail: Peter@Kunstgriff.eu
Webseite: http://www.Kunstgriff.eu
View all ads by this user
  Report Fraud
  Tips for safe trading
Print Ad
By contacting via e-mail, your data will be transmitted by you to the provider of this article and stored and processed by the provider for this purpose.



Other ads by this user

Other interesting articles