Soundweb London Blu-100 BSSBLU100-EU

Soundweb London Blu-100 Digital Signal Processor
Order now: https://cuesale.com/product/soundweb-london-blu-100-bssblu100-eu/


The Soundweb London BLU-100 DSP Matrix provides a premium package with fixed I/O configuration and freely programmable DSP. 12x analogue inputs and 8x analogue outputs are available and the BLU-100 can receive an additional 48x channels via the redundant digital BLU-Link audio bus. Networking is possible with the devices BLU-800/320/160/120/101/102/BOB/BIB. Of the total 256x channels of the digital audio bus, audio channels 1-48 can be received and processed by the BLU-100. The DSP capacity of the BLU-100 has been doubled compared to the BLU-80/BLU-16 units. The BLU-100 is configured, controlled and monitored via HiQnet London Architect or HiQnet Audio Architect software.
Remote control units such as faders, pots, switches, etc. are connected via 18x analogue control interfaces. Suitable BSS remote controls are BLU-3/6/8 zone controllers and the convenient BLU-10 touch screen remote control.

Features

12 analogue mic/line inputs (with phantom power per channel)
8 analogue line outputs
Configurable signal processing
Large selection of processor and logic objects
Audio bus with 48 channels, redundant, with low latency
LED status displays on the front of the device
Bi-Directional Localisation Function
12 control inputs and 6 control outputs (GPIO)
Complete documentation for control via media control systems
HiQnet™ Connection
Configuration, control and monitoring with the software HiQnet™ London Architect
Technical Data

Per input: signal, CLIP, 48V
Others: COM, STAT, ERR, PWR
Analogue inputs: 12 electronically balanced, Phoenix/Combicon connectors
Mic/Line inputs: Nominal gain 0 dB, electronically switchable up to +48 dB, in +6 dB steps
input impedance: 3,5 kOhm
Max. Input level: +20 dBu at 0 dB input gain, +8 dBu at 12 dB
CMRR: > 75 dB at 1 kHz
Input noise (E.I.N.): < -128 dBu typ. with 150 Ohm source
Phantom power: 48 V nominal, switchable per channel
A/D latency: 37/Fs (0.77ms @ 48k)
Analogue outputs: 8 electronically balanced, Phoenix/Combicon connector
Max. output level: +19 dBu
Frequency response: 20 Hz – 20 kHz (+0.5 dB / -1 dB)
THD: < 0.01 % 20 Hz – 20 kHz, +10 dBu Output level
Dynamic range: 108 dB typ., 22 Hz – 22 kHz unweighted
Crosstalk attenuation: < -75 dB
output impedance: 40 Ohm balanced, 20 Ohm unbalanced
D/A latency: 29/Fs (0.60ms @ 48k)
Control connections: 12 inputs and 6 outputs
Control input voltage: 0 – 4.5 V
Control input impedance: 4.7 kOhm against +5 V (2-wire mode), > 1MOhm (3-wire mode)
Control output voltage: 0 or +5 V
Control output impedance: 440 Ohm
Control output current: 10 mA source, 60 mA sink
Watchdog output: Phoenix/Combicon connector for function failure indication
Output current: 14 mA max.
Dielectric strength: 80 V max (switched off))
Serial impedance: 220 Ohm (galvanically isolated)
Network for control data
connections: RJ45 Ethernet
Max. cable length: 100 m with CAT 5e between device and Ethernet switch
Digital Audio Bus

Connections: 2 x RJ45 Ethernet
Max. cable length: 100 m with CAT 5e between two devices
Max. number of units: 60
Latency: 11/Fs (0.23ms @ 48k)
Pass through latency: 4/Fs (0.08ms @ 48k)
Power supply and dimensions

Operating voltage: 100 – 240 V AC, 50/60 Hz
Power consumption: < 55 VA
BTU Rating: < 188 BTU/hr
Operating temperature: 5°C – 35°C


€995,00 Ex V.A.T. (MwST) per piece.

Prices are Excluding 21% VAT / MwSt.

Products are located in The Netherlands, customers with a V.A.T. ID number pay 0% V.A.T. / MwSt
Please send us your full address for a shipment quote / price.

For more used equipment check our other advertisements on this site or have a look at our website www.cuesale.com