Drucken - Gebrauchte-Veranstaltungstechnik.de

Die 2 Winch waren ein halbes Jahr an der Decke (20x rauf und runter), wurden dann eingelagert.

Wie Neu!

Description
If you have heavy load stage equipment that you want to create flying effects on stage, the Winch 50 is a great solution. It is a DMX Winch perfect for lifting heavier loads up to 50 kg. The winch is the strongest of all Wahlberg DMX winches. It is thus great for lifting stage equipment such as flats, ceiling pieces, picture frames and window units. Only your imagination is the limit.

Heavy weight rigging with the Winch 50
Working alone or configured together, you can use the Winch 50 for flying dimensional set pieces or rigging heavier weight drapery fabrics. With the DMX control you can set positions and limits quick and easy. Complex motion cues can be written and recalled with ease, so the effects are automated as much as possible, directly from your lighting desk. Easily integrated in your stage design.

The Winch 50 is a great winch for lifting and moving stage props, screens, drapes, lights, etc. in and out of the stage sphere. Several winches can easily be connected as a chain, allowing for advanced and creative ways of making dynamic movements of several objects at the same time.

You can control the winch directly from the lighting desk. This way it can be controlled to fit and interact in line with the show and lighting design. The winch 50 has an advanced positioning system controlled from a 16-bit DMX channel. It is highly accurate; the winch stops within just 1 mm.

Furthermore, you can control the speed of the winch via DMX. It is also possible to set the upper and lower limits of the movement of the winch, thus adjusting its range of motion and your specific stage requirements.

Technical specifications
Model:
Winch 50
Item no.:
Dimensions (L×W×H):
245
246.701 Power supply:
Power consumption: Power inlet/outlet: DMX control signal:
DMX connection:
Lifting height:
Lifting capacity:
Lifting speed:
Minimum load:
Noise emission (at 1 m): Ambient temperature Own weight:
245
246.701 Mounting clamp:
Motor: Duty cycle:
Lifting wire specifications:
Liftingwire:
Winch 50 & Winch 50 Double 245 and 246.701
345 × 298 × 445 mm / 13.6 × 11.7 × 17.5 in. 797 × 298 × 445 mm / 31.4 × 11.7 × 17.5 in. 200-240V AC 50-60 Hz.
500 Watt.
Neutrik powerCON TRUE1 NAC3PX (F/M) DMX 512 1990 + DMX512A / 6 channels used. 5 pole XLR, male & female
12.5 m (41.0 ft.)
50 kg (110 lb)
Variable, 0.09-0.45 m/s (3.5-17.7 in/s)
5 kg (11 lb)
~50 dB
0-40°C (32-104°F)
29.1 kg (64.2 lb)
45 kg (88.2 lb)
2×2 Slim eye coupler 50 mm (2 in)
230V AC, 0.55 kW 2800 rpm
Maximum 30% at max. load (refer to page 29) Minimum 23 min OFF after 10 minutes ON
3 mm (1/8 in) 19×7 galvanised steel wire (EN 12385-4)
Minimum breaking load (wire): 588 kg (5.79 kN / 1,296 lb) Wire safety factor: Minimum 10
Wire fleet: 83 mm (3.27 in)
Wire fleet angle: NoneWinch 50

Wahlberg Winch 50

Angebotsdaten

Beschreibung

Anbieter