Crest Audio CKi 800v Cobranet NxDSP Amplifier

Tontechnik -> Verstärker -> Crest Audio CKi 800v Cobranet NxDSP Amplifier

Angebotsdaten

Price: 395,00 € netto excl.21% tax
          477,95 € brutto incl. 21% tax
Per Piece fixed price
Erstellt: 29.05.2024 16:36
Zustand:
Gebrauchtware

Beschreibung

Crest Audio CKi 800v Amplifier with Cobranet and NxDSP
Order now: https://cuesale.com/product/crest-audio-cki-800v-cobranet-nxdsp-amplifier/


Crest Audio, the first company to offer computer controlled amplification now raises the bar. With the introduction of the CKi series of amplifiers, Crest Audio has added many standard features that other manufactures either charge additional for or don’t offer at all.Whether your requirements are simple or extremely complex, CKi series amplification systems are perfect for permanent installations of any size. As with all Crest Audio amplifiers, reliability and sonic performance are the most important factors in the amplifiers design.

CKi 800V :

Legendary overbuilt power supply
Rear-mounted attenuators with removable knobs
Euro-style connection block, input and output
Front panel labeling area
Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
PowerSave and sequential turn off (hardwired STO standard on all models)
Fault I/O for connection to other monitoring systems
Specifications :

Output Power, 70.7V: 400 Watts
Max RMS Output Voltage (each channel): 92 Volts
Peak Output Voltage (each channel): 130 Volts
Frequency Response (+0 / -0.3dB, 1W/70.7V): 10Hz-20kHz, -3dB @148kHz
Power Bandwidth (full power, 1% THD+N): 10Hz – 20kHz, +0/-0.2 dB
TourClass® Protection ACL, IGM, AutoRamp, short circuit, DC voltage, turnon/off transient, current inrush, sub/ultrasonic input.
THD+N (rated power, 1kHz): <0.1% @ 70.7V out
SMPTE IMD (rated power, 60Hz & 7kHz): <0.1% @ 70.7V out
Input CMRR (1kHz): >60 dB
Input Sensitivity (rated power): 1.77V @ 70.7V out
Standard Voltage Gain X40 (jumper-selectable for X20 or .775V sens.)
Input Impedance (balanced/unbalanced) >20k Ohms / >10k Ohms
Hum and Noise (“A” weighted, rated power): -105 dB
Crosstalk (“A” weighted, rated power): >-60dB
Class: AB
Input Connectors (per channel): Rear-panel barrier strip input, 4-pin Phoenix sequential turn-on/off connector on standard CC-STL module
Output Connectors (per channel): Rear-panel barrier strip output
Filter Storage: 11,200 μF
Power Supply (factory configured): 100V-240V, 50-60Hz
Idle Current Draw 120V: 0.8A (PowerSave active)
1/8 Power Curr. Draw (typical music, 120V/70.7V): 7.0 A
1/3 Power Curr. Draw (cont. music, 120V/70.7V): 10.1 A
Max Curr. Draw (breaker rating, 120V/70.7V): 15.0A
Thermal Emissions (1/8 Power, 70.7V): 2540 BTU/hr
Thermal Emissions (1/3 Power, 70.7V) 3263 BTU/hr
Country of manufacture: United States
Cooling: Variable speed, front panel mounted fan, front-to-side airflow
Controls: 3-position front panel On/Remote/Off switch, two rearpanel channel attenuators, AC mains circuit breaker
Indicators: Signal, ACL (one per ch.) Protect, Active
Construction: Steel chassis, 16 guage. Double thickness in rack ear areas.
NxCobraNet Module :

The NxCobraNet module supports all NexSys control and monitoring functions as well as delivering two channels of CobraNet digital audio to the amplifier on one ethernet cable. Supported computer controlled NexSys functions include gain, sequential power, and real time load monitoring.Amplifier monitoring includes input and output level
(VU), DC protect, thermal protect, IGM, clip status, power state,AC mains, heatsink temperature, gain selection, ground lift status, and audio return.
The LED display allows easy in rack readout and monitoring of temperature, gain, AC voltage, IP address, amplifier ID, as well as CobraNet bundle and channel status.
Individual indicators display fault and mute status by channel as well as ethernet link and data indicators.
The NxCobraNet module requires no other additions to make it network ready.
The module has an RJ-45 ethernet connection that is made through a Category 5 compliant Neutrik EtherCon connector to ensure a secure connection.

NxDSP Module :

The Crest Audio NxDSP plug in board for NxCobraNet and NxEthernet performs various functions depending on which module it is used with.
NxCobraNet module: in addition to speaker processing the DSP installed in the NxCobraNet module provides 8 channels of CobraNet audio decoded to analog outputs on the back of the module.


€395,00 Ex V.A.T. (MwST) per piece.

Prices are Excluding 21% VAT / MwSt.

Products are located in The Netherlands, customers with a V.A.T. ID number pay 0% V.A.T. / MwSt
Please send us your full address for a shipment quote / price.

For more used equipment check our other advertisements on this site or have a look at our website www.cuesale.com

Anbieter

CUE Sale B.V.
Hugo van Dijk
Zoerbeemden
NL6245LR, Eijsden
Telefon: 0031432043020
E-Mail: Info@cuesale.com