← Powrót do przeglądu · Wzmacniacze

Electro Voice P1201 + M118S Module

Firmowe
Oferta · Ogłoszenie nr 1163627 · utworzono 17.11.2026
Stan Gebraucht ★★★★★ 3 z 5 gwiazdek – Dobry stan techniczny, zużycie wizualne odpowiednie do wieku
Samoocena sprzedawcy: 5 = nowy/jak nowy, 0 = uszkodzony lub na części.
Dostępna ilość1 Sztuka
ProducentElectro Voice
ArtykułP1201 + M118S Module

Ten opis został napisany przez sprzedawcę w języku Deutsch.

Electro Voice P1201 + M118S Module
Order now: https://cuesale.com/product/electro-voice-p1201-m118s-module/

Electro Voice P1201 Power Amplifier + M118S Module Card in good condition.

Modular Precision Series Amplifier 1 x 1200 W

P-Amps – a modular power amplifier concept and the most flexible solution for any mobile and permanent installation application. The modular architecture of the P-Amps allows flexible selection of filter/signal processor as well as input and output modules. This provides the possibility to easily include P-Amps power amplifiers into basically any existing and most of all any future application, using principally any connection technique.

Technical Specifications:

- Load Impedance: 8 \ 4 \ 2 Ohms
- Maximum Midband Output Power,THD = 1%, 1 kHz: 750 \ 1200 \ 1600 W
- Rated Output Power, THD < 0.2%, 20 Hz – 20 kHz: 500 \ 1000 \ —— W
- Max. Single Channel Output Power, Dynamic-Headroom, IHF-A: 850 \ 1450 \ 1700 W
- Maximum RMS Voltage Swing, THD = 1%, 1 kHz: 86 V
- Voltage Gain at 1 kHz: 33 dB
- Slew Rate at 1 kHz: 40 V/us
- Power Consumption at 1/8 maximum output power at 4 Ohms: 870 W
- Input Sensitivity at rated output power at 4 Ohms, 1 kHz: 1.4 V
- THD at rated output power, MBW = 80kHz, 1kHz: < 0.05 % Frequency Response, -1dB, ref. 1 kHz: 13 Hz – 45 kHz Power Bandwith, THD = 1%, ref. 1 kHz, half power at 4 Ohms: 10 Hz – 50
- kHz Input Impedance, 20 Hz – 20 kHz, balanced: 20 kOhms Damping Factor at 100 Hz / 1 kHz, 8 Ohms: > 300 / > 200
- Signal to Noise Ratio, A-weighted, non internal summing mode: 106 dB
- Protections: Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn-on delay
- Dimensions (W x H x D): 483 x 132.5 x 426 mm
- Weight: 17 kg