Meyer Sound M’Elodie Array Loudspeaker
FirmoweSamoocena sprzedawcy: 5 = nowy/jak nowy, 0 = uszkodzony lub na części.
Ten opis został napisany przez sprzedawcę w języku Deutsch.
Meyer Sound M’Elodie Array Loudspeaker
Order now: https://cuesale.com/product/meyer-sound-melodie-array-loudspeaker/
Meyer Sound M’Elodie Line Array Loudspeaker , fly bars available
UltraCompact high-power curvilinear array loudspeaker
Sometimes, big things come in small packages. The M’elodie ultracompact high-power curvilinear array loudspeaker is a good example. M’elodie is Meyer Sound’s newest generation of a strong family line: the celebrated M Series. M’elodie brings the sonic signature and easy to use rigging of the MILO family of loudspeakers, along with an extraordinary power-to-size ratio to a package smaller than the company’s MICA compact high-power curvilinear array loudspeaker. As a result, M’elodie is compact enough for small theatres, ballrooms and clubs, as well as being an outstanding performer in theatrical productions and corporate AV applications.
Where is the Melodie system made for?
While M’elodie can be used as a main system in small venues, its broad 100-degree horizontal coverage makes it ideal for use in larger venues, too, as it is designed to integrate seamlessly with MICA. M’elodie’s QuickFly rigging, which features captive GuideALinks for the maximum in flexibility and safety, make it easy to add as downfill to a MICA array, but individual M’elodie cabinets also work exceptionally well for frontfill or under-balcony coverage. Best of all, M’elodie’s small footprint takes up little truck space.
M’elodie is the latest self-powered loudspeaker from Meyer Sound, the company that introduced controller-assisted loudspeakers more than 27 years ago and self-powered sound reinforcement systems over 11 years ago. With an all-new low-frequency driver and amplifier, plus Meyer Sound’s famous complex crossover, driver protection, and frequency and phase correction circuitry, M’elodie provides a reliable, low-distortion solution for a key segment of the sound reinforcement market. M’elodie’s diminutive size belies a powerful voice: conservatively rated at a maximum peak output of 131 dB SPL, M’elodie is capable of filling rooms much larger than one would expect.
Specifications :
Acoustical :
- Operating frequency range : 70 Hz – 18 kHz
- Frequency response : 76 Hz – 16 kHz ±4 dB
- Phase response : 1.5 kHz – 16 kHz ±30°
- Maximum peak SPL : 131 dB
- Dynamic range : >110 dB
- Acoustical crossover : 1100 Hz
Coverage :
- Horizontal coverage : 100°
- Vertical coverage Varies, depending on array length and configuration
Transducers :
- Low/low-mid frequency : Two 8” cone drivers with neodymium magnets
- Nominal impedance : 4 Ω
- Voice coil size : 1.5”
- Power handling capability : 600 W (AES); 900 W peak
- High frequency : 3” compression driver
- Nominal impedance : 8 Ω
- Voice coil size : 3”
- Diaphragm size : 3”
- Exit size : 1.2”
- Power handling capability : 180 W (AES); 360 W peak9
Audio input :
- Type : Differential, electronically balanced
- Max. common mode range : ±15 V DC, clamped to earth for voltage transient protection
- Connectors : Female XLR input with male XLR loop output or VEAM all-in-one connector (integrates AC, audio, and network)
- Input impedance : 10 kΩ differential between pins 2 and 3
- Wiring :
- Pin 1 : Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
- Pin 2 : Signal +
- Pin 3 : Signal –
- Case : Earth ground and chassis
- DC Blocking : Differential DC blocking up to max common mode voltage
- CMRR : >50 dB, typically 80 dB (50 Hz – 500 Hz)
- RF filter : Common mode: 425 kHz
- Differential mode : 142 kHz
- TIM filter : 10 sec) : 2.3 A rms (115 V AC); 1.2 A rms (230 V AC); 2.6 A rms (100 V AC)11
- Burst Current (