Roland M400 Mischpult im professionellen Procase.
Das Pult funktioniert einwandfrei und hat uns NIE im Stich gelassen.
Schwanenhalslampe, Kaltgerätekabel, Schutzhülle und Case sind mit dabei.
Connectors XLR Inputs (1 to 8 ): XLR-3-31 type (balanced with phantom power) Talkback Mic Input: XLR-3-31 type (balanced with phantom power) RCA Inputs (L/R): RCA Pin Type XLR Outputs (1 to 8): XLR-3-32 type (balanced) Phone Output: Stereo 1/4 inch phone type Digital Outputs: Optical type x 1 and Coaxial type x 1 REAC Ports: RJ-45 EtherCon type x 3 USB Ports: A type x 1 and B type x 1 Remote Connectors: RS-232C (D-Sub 9 pin type) x 1* MIDI (5 pin DIN type) x 2 (Out/Thru & In) Other Connectors: LAMP (XLR-4-31 type) x 1, Grounding terminal, AC Input * Serial remote control is not available on version 1 firmware Input Output CaracteristicsFrequency Response XLR output jacks (1 to 8): -2 dB / +0 dB (20k ohms load, +4 dBu) Phones jack: -3 dB / +0 dB (40 ohms load, 150 mW) Total Harmonic Distortion + Noise: XLR output jacks (1 to 8): 0.05 % (typical), Phones jack: 0.05 % (typical) Dynamic Range XLR output jacks (1 to 8): 110 dB (typical) Cross Talk@1kHz XLR input jacks (1 to 8): -80dB (Pad: ON, Input gain: +10 dBu, typical) XLR output jacks (1 to 8): -100 dB (typical) Nominal Input Level (Variable) XLR input jacks (1 to 8): -65 to -10 dBu (Pad: OFF) or -45 to +10 dBu (Pad: ON) RCA input jacks (L/R): -18 to 0 dBu Talkback input jack: -50 to -10 dBu Input Impedance XLR input jacks (1 to 8): 14 k ohms, RCA input jacks (L/R): 10 k ohms, Talkback input jack: 41 K ohms Non Clip Maximum Input level XLR input jacks (1 to 8): +8 dBu (Pad: OFF) or +28 dBu (Pad: ON),RCA input jacks (L/R): +18 dBu, Talkback input jack: +8 dBu Nominal Output Level XLR output jacks (1 to 8): +4 dBu (Load impedance: 10 k ohms) Output Impedance XLR output jacks (1 to 8): 600 ohms, Phones jack: 100 ohms Recommended Load Impedance XLR output jacks (1 to 8): 10 k ohms or greater, Phones jack: 8 ohms or greater Non Clip Maximum Output level XLR output jacks (1 to 8): +22 dBu (1 kHz, 10 k ohms load) Phones jack: 150 mW + 150 mW (1 kHz, 40 ohms load) Residual Noise Level (IHF-A, typical): -88 dBu (All faders : Min) Equivalent Input Noise Level (E.I.N.): -126 dBu OtherDisplay: 800 x 480 dots Wide VGA backlit TFT full color Power Supply: AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz) Power Consumption: 95 W
Privatverkauf. Gerät funktioniert einwandfrei.